About This Operating Manual; Manufacturer Details; Copyright; Liability And Warranty - Rohm DURO-M Traduction Du Manuel D'utilisation Original

1

About this Operating Manual

This Operating manual describes in detail the use, installation, assembly
and maintenance of the Lathe chuck DURO-M. The efficiency of the Lathe
chuck depends primarily on correct use and careful maintenance. This Op-
erating manual serves as the leading document and is provided on delivery
of the product. The personnel must have carefully read and understood the
Operating manual before beginning any work. Observance of all safety in-
structions and instructions for use in this Operating manual is the basic pre-
requisite for safe work with the Lathe chuck. In addition to the regulations
listed here, the local and user-related operating instructions and the profes-
sional accident prevention regulations are to be observed.
1.1

Manufacturer Details

RÖHM GmbH
Heinrich-Röhm-Straße 50
89567 Sontheim/Brenz
Germany
Tel.:
Fax:
Web:
E-mail:
1.2

Copyright

This Operating manual is protected by copyright and is intended for internal
purposes only.
The forwarding of the Operating manual to third parties, reproduction by
any means – even in part – as well as use and/or communication of the con-
tent without the permission of RÖHM are prohibited (except for internal pur-
poses).
Infringements will lead to claims for compensation. We reserve the right to
assert further claims.
1.3

Liability and Warranty

All information and instructions in this Operating manual are given in good
faith on the basis of our experience and knowledge to date. The products of
RÖHM are constantly developed. RÖHM therefore reserves the right to
make any modifications and improvements deemed useful. However, there
is no obligation to extend these modifications and extensions to any previ-
ously delivered Lathe chucks. The Lathe chuck is constructed exclusively
for the purpose specified under "Intended Use". Any use beyond this is
deemed to be inappropriate. RÖHM is not liable for damage resulting from
such use. The risk is borne solely by the operator. Product liability for con-
B1385260 DURO-M
+49 7325 160
+49 7325 16492
www.roehm.biz
info@roehm.biz
About this Operating Manual | 1
EN
61 / 280