7.2
Maintenance Interval
The regular maintenance work is described in the following:
Activity
Check the tightness of the screw
connections.
See Checking the Tightness of
Screw Connections [} 98].
.
See .
Lubricate the jaw guides.
See Lubricating Jaw Guides
[} 99].
Check clamping force.
See Checking the clamping force
[} 99].
Partial cleaning.
See Partial Cleaning [} 106].
Whole cleaning.
See .
B1385260 DURO-M
Interval
After 80 h. Lubricate
Depending on conditions of use and
use of coolant after 40 h.
For every jaw change.
After 40 h, depending on the condi-
tions of use and use of coolant
6000 hours or once a year, if neces-
sary several times.
Depending on conditions of use and
use of coolant after 100 h.
Depending on conditions of use and
use of coolant after 1000 h.
Maintenance | 7
EN
97 / 280