MINN KOTA RIPTIDE ULTERRA Instructions D'installation page 22

STOwING THE MOTOR wITH I-PILOT LINK
Stowing the Motor with i-Pilot Link
1
a. Press the Home
b. Scroll through the Content Area using either your
finger or the Screen Navigation button to find
the Ulterra
c. Select the Ulterra
finger or by pressing the Ok button to open the
Ulterra Menu.
NOTE:
The Ulterra
in the Content Area with the Home Control
Buttons on i-Pilot Link systems on an Ulterra
motor. The motor can only be stowed when it is
currently deployed.
2
d. Once in the Ulterra Menu, find the Stow
button and select it.
NOTE: The Stow
when the motor is deployed.
WARNING
As soon as the Stow
will automatically stow. Be sure the motor is clear from
obstructions and has a clear path of travel. The Prop is
disabled while the motor is being stowed to prevent
accidental contact with the rotating propeller.
e. The Ulterra motor will stow. While the Motor
is stowing, it is possible to pause the action. To
pause the action, find the Pause
select it.
18 | minnkotamotors.com
button.
button.
button using either your
button can only be found
button can only be found
button is selected, the motor
button and
1c
2d
1c
2e
©2016 Johnson Outdoors Marine Electronics, Inc.