MINN KOTA RIPTIDE ULTERRA Instructions D'installation page 20

DEPLOYING THE MOTOR wITH I-PILOT LINK
2
c. Use the Right Softkey
Stow menu. Once selected the motor will
automatically stow.
WARNING
As soon as the Stow menu is selected, the motor will
automatically stow. Be sure the motor is clear from
obstructions and has a clear path of travel. The Prop is
disabled while the motor is being stowed to prevent
accidental contact with the rotating propeller.
d. While the Motor is stowing, it is possible to stop
the action. Use either the Left Softkey
select the Deploy menu or the Right Softkey
to select the Pause menu.
e. If the Motor continues, it will complete the Stow
process and the Prop will be disabled.
Deploying the Motor with i-Pilot Link
1
a. Press the Home
b. Scroll through the Content Area using either your
finger or the Screen Navigation button to find
the Ulterra
c. Select the Ulterra
finger or by pressing the Ok button to open the
Ulterra Menu.
NOTE: The Ulterra button can only be found
in the Content Area with the Home Control
Buttons on i-Pilot Link systems on an Ulterra
motor. Certain Home Screen Buttons may be
locked out while the motor is stowed because
those functions require the motor to be
deployed to operate.
16 | minnkotamotors.com
to select the
button.
button.
button using either your
2d
to
1c
2e
1c
©2016 Johnson Outdoors Marine Electronics, Inc.