2.3. Connection
Before wiring, check on the label that the model in fact matches your need. The
controller must be supplied at a voltage between 90 and 260V. We recommend
protecting the device by a fuse having a rating of not more than 2 A. Do not connect
anything to the unused terminals, because they may be connected to internal circuits.
Several types of output are proposed for Series 15 STATOPs: Relay, 0/5 V logic
voltage, 4-20 mA or 0-10 V analogue output. The connection depends on the type of
output.
STATOP 24-15
Page 35