Operating Precautions - Chauvin Arnoux PYROCONTROLE STATOP 15 Série Notice De Fonctionnement

Meaning of the symbol:
ATTENTION! Read the user's manual before using the device. Failure to comply with
or correctly perform instructions preceded by this symbol in this user's manual may
result in bodily injury or damage the device and the installations.
Thank you for buying a STATOP series 15 temperature controller .
For best results:
•
. Read this user's manual carefully
. • Observe the operating precautions
•
Before plugging it in, check that the temperature controller is compatible with your
supply voltage.
• Your temperature controller is designed to control the temperature in response to
a specific type of input signal
(type of sensor, measurement range). Do not apply an input signal other than the
type for which it is designed to your temperature controller.
• Observe the installation precautions (see § 2.1).
• Check that the type of output corresponds to your type of installation and make
sure that the output characteristics are not exceeded.
• Your temperature controller is a measuring device. As such, it should be checked
regularly by a calibration service.
Our warranty is valid, except as otherwise stated, for twelve months following the date
of delivery or reception of the equipment (extract from our General Conditions of Sale,
communicated on request).

OPERATING PRECAUTIONS

WARRANTY
Page 31