Description Of The Parameters - Chauvin Arnoux PYROCONTROLE STATOP 15 Série Notice De Fonctionnement

3.4 Description of the parameters

Description of parameter
Parameter
SP1 Setpoint of output 1
SP2 Setpoint of output 2 if it has
an alarm function
LOCK Select parameters to be
locked
INPT Selection of the type of input
UNIT Selection of input units
Adjustment range
Min: SP1L Max: SP1H
Min: -19999 Max: 45536
0 nonE: No parameter locked
1 SEt: Installation data
locked
2 uSEr: Installation data and user data are
locked, except setpoint value
3 ALL All data are locked
0 J_tC: Type J thermocouple
1 k_tC: Type K thermocouple
2 t_tC: Type T thermocouple
3 E_tC: Type E thermocouple
4 b_tC: Type B thermocouple
5 r_tC: Type R thermocouple
6 S_tC: Type S thermocouple
7 n_tC: Type N thermocouple
8 L_tC: Type L thermocouple
9 Pt.dn: DIN curve, PT100 ohm
10 Pt.JS: JIS curve, PT100 ohm
11 4-20: Linear input current, 4-20 mA
12 0-20: Linear input current, 0-20 mA
13 0-60: Linear input voltage, 0-60 mV
14 0-1v: Linear input voltage, 0-1 V
15 0-5v: Linear input voltage, 0-5 V
16 1-5v: Linear input voltage, 1-5 V
17 0-10: Linear input voltage, 0-10 V
0 ° C: Unit in degrees C°
1 ° F: Unit in degrees F°
2 Pu: Process unit
Default
value
25.0° C
10.0° C
0
1
0
Page 40