Télécharger Imprimer la page

Opex Sure Sort Traduction Des Instructions Originales page 36

Publicité

Les langues disponibles

Les langues disponibles

- Machine maintenance, particular operations, and all
Machine Maintenance
adjustments, whether mechanical or electrical, shall be carried out by persons
authorized to do so in accordance with a safe system of work.
- A cloth (or similar
Do not attempt to clean the machine while it is running
material) should never be used to clean moving parts such as belts or rollers.
The use of such material on moving mechanisms can result in damage to the
machine or severe personal injury. If a belt, roller, gate or similar part needs to
be cleaned, hand-crank the part during cleaning or clean it while stationary.
Do not use flammable, high pressure, "canned air" to clean dust and debris
from the machine.
-
Familiarize yourself with the location(s) of machine Emergency Stop switches
The E-Stop switches enable a quick stop of all motors in the machine, in the
event of an emergency involving potential personnel injury. Note that the E-
Stops should not be used for normal stopping. For more on proper operations
of the machine, refer to
"Operation" on page
111.
- Keep all areas around the machine clear of obstacles.
Machine access
- This equipment is not suitable for use in locations
Keep away from children
where children are likely to be present.
18
Safety
Sure Sort™ Operator Manual
OPEX Corporation

Publicité

loading

Produits Connexes pour Opex Sure Sort