- A problem with the system, typically (but not always) caused by a
Jam
blockage.
- A collection of the settings and methods the system will use to process
Job
items in a similar fashion from run to run. In many cases, you will only see one
job, which should be set up ahead of time, either by an OPEX technician or
your site supervisor or IT department.
- This is the first expansion module. It is also where iBOTs are
Loading module
loaded into the system.
- This is a safety device. When you are servicing the machine,
Lock out tag out
you turn it off. The Lock out Tag out switch is on the front of the AC enclosure.
When you are going to service or enter the machine, you should put a lock on
this device to ensure that no one will turn the machine on while you are
servicing the machine.
- Person who creates operators and has access to most of the
Manager
machine's controls and features.
- Vertical series of menus on the left side of the screen. Use the
Menu bar
Menu Bar to navigate through the various system parameters and utilities.
- Used for video on the monitor DVI (Digital Video Interface).
Monitor DVI cable
It is a better quality than VGA.
- The quality of VGA (Video Graphics Interface) is not as
Monitor VGA cable
good or fast as DVI.
- The person running the machine. Operators have very limited
Operator
access to system controls and settings.
- The Barcode system tunnel that reads the barcodes on the
OPEX scan tunnel
packages.
- This sensor resides on the pacing conveyor section before the
Pacing Sensor
imager entry sensor. If the imager entry sensor is detecting an object waiting
for an iBOT, the pacing sensor will stop the pacing conveyor belts until the
previous object has been sent. This avoids packages bunching up on one
another and allows the system to send one object at a time.
- The Pack-to-Light (PTL) feature consists of a series of
Pack-To-Light system
lights that can be configured to indicate bin status. Some examples are: when/
where there's a jam, bin is full, the order is complete.
Glossary
163
Sure Sort™ Operator Manual
OPEX Corporation