Opex Sure Sort Traduction Des Instructions Originales page 146

7. Turn the red handle of the main disconnect switch to the OFF position (see
Figure 2-14).
8. Pull the tab out on the main disconnect switch handle and place a hasp
through the tab (Figure 2-15).
Open hasp and attach it to tab of handle...
...then close hasp, so that a padlock can
be attached through one of the six holes
Hasp attached to disconnect switch handle
Safety
ON Position
Figure 2-14: Main disconnect switch handle
Figure 2-15: Hasp detail
Sure Sort™ Operator Manual
OPEX Corporation
OFF Position
73