Lock-Out/Tag-Out Devices Required - Opex Sure Sort Traduction Des Instructions Originales

2.6.2. Lock-out/Tag-out devices required

2.6.2.1. Lockout station
The LOTO procedures require the use of the Lock-Out Station (Figure 2-11) or
an equivalent kit.
Figure 2-11: Lock-Out/Tag-Out Wall Mount Station
2.6.2.2. Power cord lockout device
For machines with a power cord plug, a power cord lockout device
71) is also required in the event that AC power to the machine must
12 on page
be fully disconnected. Full de-energization of AC power is required in, but not
limited to, the following situations:
• machine assembly, dismantling or relocation
• performing maintenance or repairs to the main AC distribution enclosure
70
Sure Sort™ Operator Manual
OPEX Corporation
This kit includes:
Wall mountable container
4 keyed-different padlocks
2 Hasps
12 Tags
12 Cable Ties
(Figure 2-
Safety