Opex Sure Sort Traduction Des Instructions Originales page 272

Press the More Info... button (Figure 4-32) to get a detailed description
about the jam and what can be done to clear it. The Authorized Employee will
clear the jam and press START on the Run screen to continue.
4.1.7.1. Load failure jams
The system will call a load failure jam when an item does not arrive on the
iBOT in the specified amount of time. This jam can occur when an item is late
or, for some reason, does not make it to the awaiting iBOT at all.
4.1.7.2. Missed/blocked sensor jams
The system will also halt for a jam, if an item does not arrive at a specific place
at a specific time. For example, items should reach the imaging conveyor
within a certain range of time. If not, the system assumes that something is
wrong and the machine will stop. An example of this type of jam is shown in
Figure 4-33.
136
Figure 4-32: "More Info..." button
Figure 4-33: Sensor blocked jam
Sure Sort™ Operator Manual
OPEX Corporation
Operation