Walk Test; Detector Alarm Memory - Abus Terxon SX AZ4301 Manuel D'installation

10.10 Walk test

The OP3 output must be appropriately programmed for
the walk test (function 83, option 5). If the user activates
the walk test function then the LED for motion detection is
activated at the detector.

10.11 Detector alarm memory

For the alarm memory function, e.g. for motion detectors,
the OP3 output must be appropriately programmed
(function 83, option 3). The first detector in the line that
triggers the event can store and signalise this.
21
UK