Erasing The Memory Of The Motor; Use And Maintenance - SOMFY HOME MOTION Tilt 50 RTS Notice

2.4.3. adding or deleting a rTS control point
Find an RTS control point (A) programmed
in the motor.
Press and hold the RTS programmed control
point (A) PROG button or the motor PROG
button until the motorised product moves
up and down: the motor is in programming
mode.
Quickly press the RTS control point(B)
PROG button to add or delete: the motorised
product moves up and down and the RTS
control point is programmed or deleted from
the motor.
2.4.4. Erasing the control point from the memory of the motor
To delete all the programmed control points,
press and hold the motor PROG button until
the motorised product moves up and down
twice.
All the control points are deleted.

2.4.5. Erasing the memory of the motor

To reset the motor, press and hold the PROG
button on the motor head until the motorised
product moves up and down 3 times.
All the settings are erased.

3. uSE aNd maiNTENaNCE

This motor is maintenance-free
These instructions only describe the use with a "Telis modulis" control point. For
use with an other control point, refer to the corresponding manual.
Copyright © 2015 Somfy SAS. All rights reserved - V1 - 03/2015
a b
b
X2
X3
9