Motor/Tube Assembly; Mounting The Motorized Tube On The Brackets; Wiring; Commissioning - SOMFY Sonesse 30 RTS Notice D'installation

3.3. Motor/tube assembly

1) Slide the motor into the tube.
2) Fix the tube to the motor with self-tapping screws or
steel pop rivets depending on the dimension (L).

3.4. Mounting the motorized tube on the brackets

If necessary, screw the bracket interface on the motor
head.
1) Mount the motorized tube on the end bracket (c).
2) Mount the motorized tube on the motor bracket (d).

4. WIRING

Connect the power cable to the motor.
+
-
To ensure electrical safety, this Class III motor
must be powered by a «SELV» voltage source
(Safety Extra Low Voltage).

5. COMMISSIONING

5.1. Programming the RTS transmitter

Switch on the power supply.
Press the UP and DOWN buttons simultaneously on
the RTS transmitter: the shade makes an Up and Down
movement and the transmitter is preprogrammed in the
motor.
Copyright © 2013-2016 Somfy SAS. All rights reserved
1
2
1
2
d
c
5