Operation With Sensors; Tips And Advice On Operation - SOMFY MAESTRIA+ 50 io Notice D'utilisation

3. 4. 2. Driven product with manual catches
The fabric can be drawn taut when the driven product, equipped with manual catches, is
at the lower end limit. This function is deactivated by default.
Always check to determine whether or not the function is activated/deactivated before
activating the function and locking the catches. Failing to do so may lead to breakage of
the driven product.
To check whether or not the function is activated
Press the "Down" button: the driven product lowers to
1)
the lower end limit.
Do not lock the catches.
2)
Press the "my" button.
3)
If the driven product goes to the favourite (my)
position, the fabric tensioning function is not
activated.
fabric tensioning function is activated.
To activate/deactivate the function
Perform a complete up and down cycle, all the way to
1)
the driven product's upper and lower end limits.
Press the "Down" button to place the driven product at
2)
the lower end limit.
Press the "my" and "Up" buttons simultaneously until
3)
If the function was deactivated, it is now activated.
If the function was activated, it is now deactivated.
To use this function
Press the "Down" button: the driven product lowers to
1)
the lower end limit.
Lock the catches manually.
2)
Press the "my" button: the driven product lowers then
3)
raises to draw the fabric taut.
To raise the driven product at the upper end limit
Press the "Down" button: the driven product lowers to
1)
the lower end limit.
Unlock the catches manually.
2)
Press the "Up" button: the driven product raises to the
3)
upper end limit.

3. 5. OPERATION WITH SENSORS

Refer to the corresponding guide.

3. 6. TIPS AND ADVICE ON OPERATION

3. 6. 1. Questions about the drive?
Observations
The driven product
does not operate.
If the driven product still does not operate, consult a home motorisation and automation
professional.
Copyright © 2015 Somfy SAS. All rights reserved.
Possible causes
The drive's overheating protection has tripped. Wait for the drive to cool down.
The Somfy io control point battery is low.
1)
3)
my
1)
2)
1)
3)
1)
3)
Check the battery and replace it
as required.
Non contractual images
EN
2)
3)
2)
2)
Solutions
61