SOMFY MAESTRIA+ 50 io Notice D'utilisation page 56

Masquer les pouces Voir aussi pour MAESTRIA+ 50 io:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
EN
E4. MANUAL ADJUSTMENT OF THE LOWER END LIMIT AND AUTOMATIC ADJUSTMENT OF THE UPPER END LIMIT
WITH AUTOMATIC CATCHING SYSTEM
The catching system at the lower end limit my vary
depending on the driven product, but the procedure
for setting the entrance/exit positions of the catches
remains the same on all systems.
Position the driven product at its half-way position.
1)
Press and hold the "Up" and "Down" buttons
2)
simultaneously for 5 seconds: the driven product
performs an initial brief up and down movement, then
a second, slower up and down movement.
Press the "Down" button: the driven product lowers.
3)
Press the "my" button to stop the product at position
4)
(P1), which corresponds to the automatic catching
system's entrance point.
Press the "my" and "Up" buttons simultaneously: the
5)
driven product raises and stops, putting tension on
the fabric.
Press the "Down" button: the driven product lowers.
6)
Press the "my" button to stop the driven product at
7)
position (P2), which corresponds to the automatic
catching system's exit point.
Press "my" until the driven product moves up and
8)
E5. MANUAL ADJUSTMENT OF END LIMITS WITH THE AUTOMATIC CATCHING SYSTEM
The catching system at the lower end limit my vary
depending on the driven product, but the procedure
for setting the entrance/exit positions of the catches
remains the same on all systems.
Position the driven product at its half-way position.
1)
Press and hold the "Up" and "Down" buttons
2)
simultaneously for 5 seconds: the driven product
performs an initial brief up and down movement, then
a second, slower up and down movement.
Press the "Up" button: the driven product raises.
3)
Press "my" to stop the driven product at the upper
4)
end limit position (if necessary, adjust the position of
the driven product using the "Up" or "Down" buttons).
Press the "my" and "Down" buttons simultaneously:
5)
the driven product lowers.
Press the "my" button to stop the product at position
6)
(P1), which corresponds to the automatic catching
system's entrance point.
Press the "my" and "Up" buttons simultaneously: the
7)
driven product raises and stops, putting tension on
the fabric.
Press the "Down" button: the driven product lowers.
8)
Press the "my" button to stop the driven product at
9)
position (P2), which corresponds to the automatic catching system's exit point.
10)
setting.
56
Non contractual images
1)
2)
5 sec.
3)
4)
P1
6)
7)
1)
2)
5 sec.
3)
5)
7)
9)
Copyright © 2015 Somfy SAS. All rights reserved.
1
P1
P
2
P2
P
5)
1
P
2
P
1
P
2
P1
P
P2
8)
P2
4)
6)
P1
8)
P1
P2
10)
P2

Publicité

Table des Matières
loading

Table des Matières