Obstacle Detection; Technical Data - SOMFY MAESTRIA+ 50 io Notice D'utilisation

EN

3. 6. 2. Obstacle detection

Obstacle detection is operational only with compatible driven products. Consult a home
Automatic obstacle detection can be used to protect the driven product and remove any
obstacles.
If the driven product encounters an obstacle when moving downwards, the driven
product stops automatically and raises slightly so the obstacle can be removed.
If the driven product encounters an obstacle
when moving upwards, the driven product stops
automatically.
3. 6. 3. Frost protection
Frost protection functions in a similar way to obstacle detection:
If the driven product detects any resistance, it stops automatically.
3. 6. 4. Adding/Deleting Somfy io control points and sensors
Refer to the corresponding guide.
3. 6. 5. Replacing a lost or broken Somfy io-homecontrol
To replace a lost or broken io-homecontrol
automation professional.

4. TECHNICAL DATA

Radio frequency
Frequency bands and Maximum power
used
Power supply
Operating temperature
Protection rating
Maximum number of control points and
associated sensors
Safety level
Somfy hereby declares that the drive covered by these instructions, marked for
input voltage 230V~50Hz and used as set out in these instructions, is in compliance
with the essential requirements of Directives 2006/42/EC and 2014/53/EU.
to produce the declaration including the place and date of issue, can be found at
www.somfy.com/ce.
62
Non contractual images
control point, consult a home motorisation and
®
868-870 MHz, tri-band two-way io-homecontrol
868.000 MHz - 868.600 MHz ERP <25 mW
868.700 MHz - 869.200 MHz ERP <25 mW
869.700 MHz - 870.000 MHz ERP <25 mW
230 V 50 Hz
- 25 °C to + 60 °C
IP 44
9
Class I
Copyright © 2015 Somfy SAS. All rights reserved.
control point
®
®