SOMFY MAESTRIA+ 50 io Notice D'utilisation page 51

These instructions apply to all variations of the MAESTRIA+ 50 io, which are available in the
current catalogue.
1. CONTENTS
1. Prior information
1. 1. Sphere of application
1. 2. Liability
2. Installation
2. 1. Assembly
2. 2. Wiring
2. 3. Set-up
2. 4. Tips and advice on installation
1. PRIOR INFORMATION
1. 1. SPHERE OF APPLICATION
MAESTRIA+ 50 drives are designed to power all types of exterior vertical blinds.
The installer, a home motorisation and automation professional, must ensure that once the
driven product is installed, it respects the current standards in the country of installation,
notably standard EN 13561 relative to exterior blinds.
1. 2. LIABILITY
Before installing and using the drive, please read these instructions carefully. In addition to the instructions
provided in this guide, please also comply with the instructions set out in the enclosed Safety instructions
document.
The drive must be installed by a home motorisation and automation professional, in accordance with
Somfy's instructions and the applicable regulations in the country of installation.
Any operation of the drive outside the sphere of application described above is prohibited. Such operation
shall exclude Somfy from all liability and invalidate the Somfy warranty, as will any failure to comply with
the instructions given herein and in the enclosed Safety instructions document.
After installing the drive, the installer must inform his customers of the operating and maintenance
conditions for the drive and must pass the operating and maintenance instructions on to them, as well
as the enclosed Safety instructions document. Any After-Sales Service operation on the drive requires
intervention by a home motorisation and automation professional.
Should any doubt arise during installation of the drive or for additional information, consult a Somfy
contact or visit www.somfy.com.
Safety Warning!
Copyright © 2015 Somfy SAS. All rights reserved.
TRANSLATED VERSION
51
51
51
52
52
53
53
58
3. Operation and maintenance
3. 1. "Up" and "Down" functions
3. 2. STOP function
3. 3. Favourite (my) position
3. 4. Fabric tension
3. 5. Operation with sensors
3. 6. Tips and advice on operation
4. Technical data
Warning!
Non contractual images
EN
60
60
60
60
60
61
61
62
Information
51