SOMFY MAESTRIA+ 50 io Notice D'utilisation page 57

2. 3. 5. Setting advanced functions
Set the advanced functions after having performed the end limit settings (§2.3.4) and
before programming the Somfy io-homecontrol
-
then possible during four complete raise/lower cycles.
A. "BACK-RELEASE" FUNCTION FOR DRIVEN PRODUCTS WITH TOP STOP ONLY
This function releases tension on the fabric after the driven product is closed at the top
stop against the head rail.
The Back Release function is deactivated by default.
To activate or deactivate the function:
-
Place the driven product at its upper end limit.
1)
Press the "my" and "Down" buttons simultaneously
2)
If the "Back release" function was deactivated, it is
now activated.
If the "Back release" function was activated, it is now deactivated.
In order to check the "Back release" function, position the driven product at its half-way
-
position, then press "Up" to raise the driven product to the top stop.
B. FABRIC TENSIONING FUNCTION WITH AUTOMATIC CATCHING SYSTEM AT LOWER END LIMIT
This function is used to adjust the fabric tension of the driven product on 3 threshold levels
(strong-medium-weak).
By default, fabric tension level is set on medium.
To adjust the fabric tension:
-
Place the driven product at its half-way position.
1)
2)
simultaneously, immediately followed by pressing and
holding the "my" and "Down" buttons simultaneously
The drive is now in set mode for ten seconds only.
Adjust the fabric tension using the "Up" or "Down"
3)
buttons.
To increase the tension on the fabric, press the "Up" button
-
until the driven product moves up and down slowly: the fabric tension of the driven product passes
to the upper threshold.
To decrease the tension on the fabric, press the "Down" button until the driven product moves up and
-
down slowly: the fabric tension passes to the lower threshold.
To validate the setting, press the "my" button until the driven product moves up and down
4)
Copyright © 2015 Somfy SAS. All rights reserved.
local control point (§2.3.6).
®
1)
1)
3)
Non contractual images
EN
2)
2)
4)
57