SOMFY MAESTRIA+ 50 io Notice D'utilisation page 59

B. READJUSTMENT OF THE AUTOMATIC CATCHING SYSTEM AT THE LOWER END LIMIT
Place the driven product at its lower end limit.
1)
Press and hold the "Up" and "Down" buttons
2)
simultaneously for 5 seconds: the driven product
Press the "Down" button: the driven product lowers.
3)
Press the "my" button to stop the product at position
4)
(P1), which corresponds to the automatic catching
system's entrance point.
Press the "my" and "Up" buttons simultaneously: the
5)
driven product raises and stops, putting tension on
the fabric.
Press the "Down" button: the driven product lowers.
6)
Press the "my" button to stop the driven product at
7)
position (P2), which corresponds to the automatic
catching system's exit point.
To validate the setting, press the "my" button again
8)
2. 4. 3.
Only switch off power (double cutout) for the driven
product to be reset.
This reset deletes all programmed control points,
sensors and end limit settings and resets the driven
product's favourite (my) position.
Position the driven product at its half-way position.
1)
Cut the power supply for 2 seconds.
2)
Switch the power supply back on for 5 to 15 seconds.
3)
Cut the power supply for 2 seconds.
4)
Switch the power supply back on: the driven product
5)
moves for a few seconds.
Press the PROG button on the Somfy io-homecontrol
6)
moves up and down two times: the drive is reset to its
Copyright © 2015 Somfy SAS. All rights reserved.
1)
3)
4)
6)
7)
1)
3)
ON
5)
ON
®
6)
Non contractual images
EN
2)
5 sec.
P1
P2
5)
P1
P1
P2
8)
P2
2)
OFF
2 sec.
5 sec.
4)
OFF
2 sec.
15 sec.
my
1
P
2
P
1
P
2
P
1
P
2
P
59