Operation And Maintenance; Up" And "Down" Functions; Stop Function; Favourite (My) Position - SOMFY MAESTRIA+ 50 io Notice D'utilisation

EN

3. OPERATION AND MAINTENANCE

This drive does not require any maintenance operation.

3. 1. "UP" AND "DOWN" FUNCTIONS

-
product raises or lowers.

3. 2. STOP FUNCTION

The driven product is moving.
Press the "my" button: the driven product stops.
-

3. 3. FAVOURITE (MY) POSITION

A slightly open position, referred to as the "favourite (my) position", other than the fully up
or fully down position, is programmed by default in the drive.
To activate this function, the drive must have performed
-
one complete cycle.
3. 3. 1. To modify the favourite (my) position
Set the driven product to the desired favourite (my)
1)
position.
Press the "my" button until the driven product moves
2)
is programmed and the old favourite (my) position is
deleted.
Only one favourite position at the end limit positions is possible.
3. 3. 2. To use the favourite (my) position
The driven product must be stopped.
Press the "my" button: the driven product moves to the
-
favourite (my) position.

3. 4. FABRIC TENSION

Fabric tensioning is possible only at the lower end limit with driven products equipped with
catches.
3. 4. 1. Driven product with automatic catching system
Fabric tensioning is always active with a driven product equipped with an automatic
catching system.
To draw the fabric taut
Press the "Down" button: the driven product lowers.
-
When it reaches the lower end limit, the driven product
raises automatically to draw the fabric taut.
If the fabric is drawn too tightly or not enough, consult a home motorisation and automation
professional to adjust the fabric tension.
To raise the driven product at the upper end limit
Press the "Up" button. The driven product starts by
-
moving downward to release tension on the fabric, then
raises to the upper end limit.
60
Non contractual images
1)
my
Copyright © 2015 Somfy SAS. All rights reserved.
2)
my
1
P
2
P
1
P
2
P