Pressure Relief; Trigger Lock; Safety Latch; Nozzle Position - Storch PowerCoat Mode D'emploi

Depressurization
After spray work is finished and prior to cleaning, che-
cking, maintenance, or transport of the device, carry out
all steps described in the 'depressurization' section.
1.
Engage the trigger safety
lock.

Trigger lock

In order to ensure that the trigger does not activate by
brushing against the hand or if the device falls, always
lock the trigger safety lock when spray work is interrupted
or ended.
Trigger safety lock
engaged
2.
Place the ventilation/
discharge valve in the
upwards position (UP) to
discharge the pressure.
Trigger safety lock
released
(red ring visible)

Nozzle position

Prior to setting the spray nozzle position, always depres-
surize the device.
Tip in front
(spray position)
Position of ventilation/
discharge valve
Upwards position
(discharges pump pressure)
103
Tip in rear
(cleaning position)
Downwards position
(ready to spray)