Assembly And Connections; Pressure Hose Connection; Spray Gun Connection; Spray Lance Connection - Storch MS 10 Mode D'emploi

5.3 Assembly and connections

5.3.1 Connecting the material hoses
Connect the material hoses (n) to the connection ports (b/c) of the material outlet on the device. If only one hose is con-
nected to the device, the sealing plug (c) remains on the second connection.

5.3.2 Spray gun connection

The spray gun (j) is connected to the material hose (n) with the quick coupling.

5.3.3 Spray lance connection

The spray lance (l) is screwed onto the spray gun (j). Make sure that the seal in the union nut of the lance is intact.

5.3.4 Nozzle connection

The nozzle (m) is placed in the union nut together with a seal and screwed onto the swivel head of the spray lance (l).
5.3.5 Intake/return hose
The intake/return hose (g) is inserted into the container with the material to be processed and fixed at the edge of the
container with the retaining clip (h). The filter on the suction hose (g) must be intact and permeable.

6. Operation

6.1 Basic safety information

Warning: Electric shock
- Only connect the device to a socket outlet (230 V) with protective contact that has been properly instal-
led by a qualified electrician.
- Couplings and connecting lines must be splash-proof.
- Use only if the power cables are in perfect condition.
- The electric motor is not explosion-protected!
Please note:
Practice start-up with water first, and familiarise yourself with the technology and operation. In doing so,
evaluate the nozzle size to see if it is suitable for the application.

6.2 Operation/Control elements

- The intake/return hose (g) is inserted into the container with the material to be processed and fixed at the edge of
the container with the retaining clip (h).
- The suction hose (g - with suction filter - ) must not take in air at any time - otherwise the material transport is
interrupted
- Always turn the pressure regulator (d) to minimum (anticlockwise) first before switching on
Please note:
Only increase the pressure while pumping and the spray gun is open.
- Plug the mains plug (i).
- Pull the trigger on the spray gun (j).
- Switch the device on (a).
- Turn the pressure regulator (d) clockwise to increase the pressure.
- When the spraying process is finished, the pressure regulator (d) on the pump unit must be set to mini-
mum pressure.
Translation of the original instruction 64