Charging The Battery; Charging Device Status Lamps; Spary Device Status Display; Operation Status Display - Storch PowerCoat Mode D'emploi

Charging the battery

The battery may leak, explode, burn, or cause explosi-
ons in case it is handled improperly. Batteries are usual-
ly cahrged up to 50% upon delivery, but they should be
charged completely prior to use.
1. Place the battery into the charging device as indicated
(the light till glow within 5 seconds).

Charging device status lamps

Display
Glowing green
Blinking green
Blinking red
Glowing red

Operation status display

Display
No display
Glowing red
Blinking red
Note:
The display lamp can only be seen when the trigger is pressed. Press the trigger to see the status display.
Note:
The battery may remain in the charging device, which
switches to maintenance mode automatically. It is not
recommended to leave the battery in the charging device
for longer than one week.
Only original STORCH abtteries may be used.
Description
Battery completely charged. Use the battery or leave it in the char-
ger. The automatic maintenance mode maintains the battery com-
pletely charged.
The battery is charging, is charged up to 80%, and may be used.
The battery is charging and is charged up to 80%. Do NOT use the
battery.
Glowing red - the battery is too hot to be charged and must be
cooled down prior to charging. Allow it to cool down in the charging
device.
Description
Normal operation.
The battery charge is too low and must be charge.
The battery temperature is too high or the nozzle is clogged.
See troubleshooting, page 8.
104