Attaching The Shoulder Strap; Attachment Of Nozzle And Nozzle Safety Lock Cap - Storch PowerCoat Mode D'emploi

Attaching the shoulder strap

1. Place the metal eyelet on the rear side of the spray
device.
Attaching the nozzle and the nozzle holder with protective cap
Table of uses
Reversible nozzle 211, 411
low-viscosity* primers
Waterproofing
Glazes
* Install the diffusor for fine surfaces.
1. Lock the trigger safety lock and place the ventilation/
discharge valve in the upwards position to discharge the
pressure.
2. Insert the velcro strap through the front mount on the
spray device and through the metal triangle, then attach
the strap.
Rversible nozzlee 213, 413
Primers
Corrosion protection
Paint
2. Attach the nozzle with the nozzle holder (ensure that
the filter is correctly installed).
NOTE:
The filter element features counter-clockwise threading.
Turn to the left (counter-clockwise) to install it. Turn to
the right (counter-clockwise) to remove it.
108
Reversible nozzle 315, 515, 517
Filler
Dispersions