Discharge Valve - Storch PowerCoat Mode D'emploi

Repair kit

Discharge valve

NOTE:
Prior to all pump repair work, carry out the rinse procedure for the spray device; see page 17.
Disassembly
1. Activate the trigger safety lock and place the ventila-
tion/discharge valve in the upwards position to discharge
the pressure.
3. Remove the pump release cap.
Installation
1. Screw the discharge valve fitting into the threading.
Tighten it with the provided tool up to 11 Nm.
2. Remove the battery.
4. Use the provided tool to
release and remove the discharge valve.
2. Attach the new pump discharge cap.
115