Storch PowerCoat Mode D'emploi page 101

DANGER OF ELECTRICAL SHOCK, FIRE AND EXPLOSION FROM TO CHARGER
Incorrect operation or use may cause electrical shock, fire, and explosions.
Only 18V lithium-ion batteries provided by STORCH may be charged; other batteries may burst.
Only use the device in a dry environment. Do not expose the device to water or rain.
In case the battery cable is damaged, request a replacement from the manufacturer to avoid danger.
Ensure that the battery's outer surface is clean and dry before you attach it to the charging device.
Position the charging device on a level, inflammable surface and keep it clear of flammable materials or
fumes while charging.
DANGER CAUSED BY PRESSURISED ALUMINIUM PARTS
Use of materials that are not compatible with aluminium in devices under pressure can cause severe chemi-
cal reactions and cause the device to break. Failure to observe this warnign may cause death, serious injury,
or property damage.
Never use 1,1,1 trichloroethane, methylene chloride, other halogenated hydrocarbon solvents, or fluids that
contain such solvents.
Many other fluids may contain chemicals that are not compatible with aluminium. Have compatibility confir-
med by the manufacturer of the materials.
DANGER DUE TO MOVING PARTS
Moving parts can clamp or separate fingers or other body parts.
Keep away from moving parts.
Never operate the device without the nozzle guard cap.
Devices under pressure may activate by themselves without warning. Prior to checking, moving, or maintai-
ning the device, depressurize the device as described in this operating manual. Detach the pwoer supply
cable.
DANGER DUE TO TOXIC LIQUIDS OR FUMES
Toxic liquids or fumes can cause serious or fatal injury in case of eye or skin contact, or if inhaled or swallo-
wed.
Read the material safety data sheets for details of the risks involved with the coatings being used.
Only store hazardous liquids in approved containers and dispose of these liquids according to appropriate
regulations.
PROTECTIVE EQUIPMENT
During operation or maintenance of the device or when occupying the device's work area, wear approriate
protective equipment in order to guard against severe injuries such as eye injuries, inhalation of toxic fumes,
burns, or hearing damage. The following protection is required for use of this equipment:
Wear safety goggles and hearing protection.
Breathing devices, protective clothing, and gloves must correspond with recommendations of the material
and solvent manufacturer.
101