General Operating Instructions; Trigger Lock; Position Of The Ventilation/Pressure Relief Valve; Approach For Relieving Pressure - Storch PowerCoat FF Mode D'emploi

General operating instructions

Trigger lock

In order to ensure that the trigger does not activate by
brushing against the hand or if the device falls, always
lock the trigger safety lock when spray work is interrupted
or ended.
Trigger safety lock engaged
Position of the ventilation/pressure
relief valve
Upward position (UP)
(For ventilating and
relieving the pump
pressure)
Trigger safety lock released
(red ring visible)
Downwards position
(ready for spraying)

Approach for relieving pressure:

Never use the device when children are nearby. Never
use the device to spray people or animals; never point the
spray device at people or animals. Keep your hands and
other body parts away from the spray gun outlet. Do not
try, for example, to stop paint spraying out with any body
part.
This spray gun builds up a pressure of 117 bar during use.
After spray work is finished and prior to cleaning, che-
cking, servicing, or transporting the device, carry out all
steps described in the 'depressurisation' section.
Engage trigger lock.
Move the ventilation/pressure relief valve to the upwards
position (UP) to relieve the pressure.

Spraying nozzle position

Prior to setting the spray nozzle position, always
depressurise the device.
Nozzle tip Nozzle tip
towards front towards the rear
(spray position) (cleaning posi-
tion)
129 Original instruction