Clearing nozzle blockages
1. To free the nozzle of clogging, lock the trigger safe-
ty lock and place the ventilation/discharge valve in the
upwards position to discharge the pressure.
3. Direct the spray device into an empty container, unlock
the trigger safety lock and switch the ventilation/dischar-
ge valve downwards into the spray position. Press the
trigger to remvoe the clog.
5. Release the trigger safety lock and place the ventilati-
on/discharge valve downwards in the spray position, then
continue the spray process.
NOTE:
The filters feature counter-clockwise threading: turn them to the left to screw them on (counter-clockwise). Turn them
to the right to remove them (clockwise).
2. Turn the nozzle tip into the cleaning position (to
towards rear)
4. Engage the trigger safety lock. Place the ventilation/
discharge valve in the upwards position to discharge the
pressure and turn the spray nozzle back to the spray posi-
tion.
6. If the nozzle is still clogged, then you may need to
repeat steps 1 to 5 and turn the nozzle from the spray
position SPRAY to the cleaning position numerous times.
Repeat step 1 to depressurize, remove, and clean the filter
or replace the nozzle with a larger one.
7. Once the clog has been removed, activate the trigger
safety lock and turn the nozzle back to the spray position.
110