Evacuate The Heating Bath; Readjust The Vacuum Seal (Glassware Set G6) - Heidolph Hei-VAP Precision Manuel D'utilisation

8.1.2

Evacuate the heating bath

WARNING Verify that the basic device is only plugged to or unplugged from
the heating bath if the main switch is switched off and/or the main
power supply is disconnected.
1. The heating bath is cooled and disconnect from power-supply. Power-switch off.
2. Take the heating bath from off the device.
3. The edge of the heating bath is designed to easily evacuate the heating bath.
Evacuate the heating bath.
8.1.3

Readjust the vacuum seal (glassware set G6)

Figure 8-2: Readjust the vacuum seal - glassware set G6
1 Valve
The seal in the valve (1) can be readjusted with a screwdriver.
WARNING Glass breakage!
Cuts.
Work carefully; do not readjust the adjusting screw too much.
Hei-VAP Precision
2 Center piece G6
Maintenance, cleaning, service
Evacuating the
heating bath
Vacuum seal
EN
71