Using A Heating Bath; Operation; Switching The Instrument On; Setting The Stirring Speed - Heidolph MR Hei-Tec Mode D'emploi

E
6

Using a heating bath

7

Switching the instrument on

Turn on the instrument's power using
the rocker switch (A) on the right side
of the housing. The green Power LED
(G) on the front panel will light. The
instrument is now in standby mode,
with the heater and motor inactive.
8

Setting the stirring speed

When using the instrument with a heating
bath (see Accessories), ensure that the
positioning rim on the heating bath is fitted
securely over the hotplate.
When using the 4l heating bath, a special
temperature sensor holder rod for 4l
heating baths (order no. 509-97000-00)
may be attached as shown (W).

OPERATION

Set the desired speed with the Speed control
knob (B). The set speed is shown on the
display (C).
Depending on how fast the speed-regulating
switch is turned, the set value changes slowly
or fast.
The stirrer will start and automatically
maintain this speed.
24