Menu Topology; Actual Value Display For All Modes; Set Pressure Mode - Heidolph Hei-VAP Precision Manuel D'utilisation

6.20 Menu topology

6.20.1

Actual value display for all modes

Menu entry Value range
Vacuum 1 and 1200 mbar; default value: 1000 mbar
Vapor Vapor temperature measured at the vapor temperature sensor.
Rotation 10 and 290 rpm in 1 rpm increments; default value: 100 rpm
Heating bath 20 °C and the max. temperature of the heating bath (to be assigned in Setup), however, no
more than 210 °C.
Softkey 1 Start vacuum
Softkey 2 Start all
Stop all
Softkey 3 Max. vacuum
Softkey 4 Stop vacuum
6.20.2 SET mode
pressure
Menu entry Value range
Heating bath 20 °C and the max. temperature of the heating bath (to be assigned in Setup), however, no
more than 210 °C.
Rotation 10 and 290 rpm in 1 rpm increments; default value: 100 rpm
Vacuum 1 and 1200 mbar; default value: 1000 mbar
Hysteresis 1 to 50 mbar; default value: 10 mbar
Timer 1 to 1440 min; in 1 min; default value: 0 min; 0=off
Accept (OK)
Softkey 1 Store Favorite
Softkey 4 Esc
Hei-VAP Precision
Operation of the Hei-VAP Precision
EN
61