Heidolph Hei-VAP Precision Manuel D'utilisation page 47

2. The cable reel is surrounded by a shell.
3. Pull the control panel apart, so that the cable reel can be seen.
The cable reel is surrounded by a shell.
4. Reel in the cable to the desired length by wrapping the cable around the reel.
5. Press the shell to the control panel.
1. Pull the control panel apart, so that the cable reel can be seen.
2. Reel in the cable to the desired length by wrapping the cable around the reel.
3. Press the shell to the control panel.
Hei-VAP Precision
Set-up and Start-up
Control panel. Op-
eration
41
EN