Installation And Connections Of System Devices - moovo XW4 Instructions Et Avertissements Pour L'installation Et L'utilisation

STEP 6

INSTALLATION AND CONNECTIONS OF SYSTEM DEVICES

Install and connect the system devices with reference to the STEPS below
and the example in fig. 22.
CAUTION! – Strictly observe the electrical connections specified in
this paragraph, as incorrect connections could lead to serious faults
or hazards.
To access the control unit, remove the cover from the gearmotor with
control unit, loosening the two lateral screws with a screwdriver (see fig-
ure alongside).
To access the control unit, remove the cover from the gearmotor with
control unit, loosening the two lateral screws with a screwdriver (see fig-
ure alongside).
22
"BUS SYSTEM"
Flashing light
DEVICE CONNECTION LAYOUT
Pair of photocells Keypad
English – 13