Vacuum Packing; Setting The Device - Steba SV 200 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 20
Before using for first time:
∙ The device must be properly cleaned before it is filled with water.
∙ Thoroughly clean container with hot water and a little washing up liquid Fill in and
let the pump run shortly, rinse and wipe dry.
∙ Attention! Do not immerse electrical part in water!
∙ Only wipe inside of lid with a damp cloth and dry.

Vacuum packing

Only use bags that are suitable for vacuum packing. There is no guarantee of proper
closure if normal bags are used. Ensure that there are no spices in the vicinity of the
weld seam, otherwise hermetic sealing will not be possible.
Please visit our homepage to get an overview about our current assortment of vacu-
um sealers, film rolls and bags.

Setting the device

Clean
Heating
water circulation
Installation
The appliance is suitable only for heating water, everything else blocks the pump.
Pay attention, that the water together with the food reaches the marking "max".
Plug in the device.
Turn on the "0/1" on the rear on the appliance.
If the water level is "min", E01 appears on the display and the device beeps three
times.
Temperature
Setting Temperature
Setting time
15

Publicité

Table des Matières
loading

Table des Matières