Working Area; Vacuum Packing; Setting The Device - Steba SV 50 Mode D'emploi

Working area:

Important: Never place the appliance on or next to a hot surface (e.g. stove). Always
use it on a stable, flat and temperature resisting surface. Always take care that no
inflammable objects are near to the appliance.
Before using for first time:
∙ Clean the device with a damp cloth externally. Then run the device into the desig-
nated pot with warm water to rinse out production residues.
∙ Attention! Do not immerse electrical part in water!

Vacuum packing

Only use bags that are suitable for vacuum packing. There is no guarantee of proper
closure if normal bags are used. Ensure that there are no spices in the vicinity of the
weld seam, otherwise hermetic sealing will not be possible.
To get on overview of our vacuum sealers and vacuum film bags and rolls, please visit
www.steba.com.
You can obtain those products in a specialist shop or at Steba Elektrogeräte GmbH.

Setting the device

On/Off switch
Control dial
Temperature/Time
Installation
∙ The appliance is suitable only for heating water, everything else blocks the pump.
∙ Safely install the device.
∙ Pay attention, that the water together with the food reaches the marking "max".
∙ Plug in the device.
∙ If the water level is "min", EE1 appears on the display and the device beeps three
times.
14
Current temperature
Timer with re-
maining time