Preparing The - WAGNER Plast Coat 430 Mode D'emploi

GB
COMMISSIONING
6.8
PREPARING THE MORTAR SPRAYING MACHINE
(FIG. 16)
Recommended sliding means for the mortar hose
Water is not sufficient as a sliding means.
Danger of clogging!
paste, art no. 2312136)
The operation light (1) shows operational readiness.
ing machine frame (3) until machine engages in the bottom
position.
Risk of injury from escaping material.
Before switching on, always check that the
material tap on the spray lance is closed
(material tap points forwards).
Close material tap whenever stopping
work.
6.8.1
RINSE THE MORTAR HOSE
(AUTOMATIC SPRAY LANCE)
Close the air flow regulator (fig. 17.2).
Do not bend the mortar hose!
Protect it against damage, for exam-
ple against being driven over as well as
against sharp objects and edges.
on.
If cellulose paste comes out of the tip, close the material tap
(fig. 17, 1) (material tap points forwards).
material.
close material tap (Fig. 17, 1).
44
-
2
Plast Coat 430
POWER
1
ERROR
4
A
R F
5
1
3
2