Remote Control - WAGNER Plast Coat 430 Mode D'emploi

Plast Coat 430
6.6
CONNECTING THE SPRAY LANCE (FIG. 10)
The tip size should amount to at least three times the
granular size, e.g.
granular size artificial resin plasters –> 3 mm
Tip size –> 10 mm
mortar hose.
ble of the mortar hose. (Automatic version only)
nection. (Fig. 12) (Automatic version only)
6.7
REMOTE CONTROL (ACCESSORY/ NOT INCLUDED
IN THE SCOPE OF DELIVERY)
The remote control can be used to set the operating mode
cable tie.
6.7.1
REMOTE CONTROL ASSEMBLY
tion and that the mains plug is disconnected.
15,2).
When the remote control is attached, the PC
430 can no longer be controlled via the device
operating panel.
If the connection cable is disconnected from
off.
material tap points forwards).
3
5
6
-
-
-
1
-
2
2
1
COMMISSIONING
2 4
POWER
ERROR
A
R F
1
GB
1
43