WAGNER Plast Coat 430 Mode D'emploi page 47

Plast Coat 430
Dismantling
Mortar spraying machine must be depres-
surised.
If necessary, set the selector switch briefly
to "R" (reverse).
Watch the manometer ––> 0 bar.
Wear safety goggles.
remove the pump unit.
troller (2) to „0".
frame (4) until the machine engages in the top position.
Loosen the union nut on the pump tube using the special
switch (1) to "R" position (reverse gear) and hold there. As
soon as the pump unit (6) has released, move selector switch
to "A" and remove pump unit.
Disconnect mains plug.
Cleaning the pump unit
Once the pump pipe has been removed from the pump unit,
the pump housing (10) up to the seals can be cleaned with a
jet of water and suitable bottle brush.
bricant.
Keep the thread of the pump housing and the pump tube
Mounting
Insert stator (9) in pump pipe (8) such that the journal sits in
the largest recess.
POWER
ERROR
A
R F
1
2
-
-
SHUTTING DOWN AND CLEANING
POWER
ERROR
A
R F
5
10
11
6
GB
4
3
6
9
8
47