Ducati 749R Manuel D'utilisation Et Entretien page 149

Notes
When refitting the panels, make sure that the front
locating pin (5) is correctly inserted in the hole at the
headlamp fairing.
Notes
To refit the left body panel, lower the side stand and
E
pass it through the opening in the body panel.
Rear-view mirrors
Unscrew the fastening screw (6) of the rear-view mirror.
Release the pins (7) from the retaining clips attached to the
headlamp fairing bracket (8). Slip off the rubber gaiter (9)
and disconnect the turn signal indicator connectors (10).
Repeat the process for the other rear-view mirror.
Important
When refitting, smear the threads of the screws (6)
with "medium-strength thread locker".
56
5
6
10 9
7
7
fig. 49
8
fig. 50