General Warnings And Safety Rules; Useful Contacts And Addresses - Tecno-gaz CLIP Manuel De L'utilisateur

ENGLISH
GENERAL WARNINGS AND SAFETY RULES
Make sure that the equipment is supplied with the correct voltage as
shown in the plate.
Do not remove the plate.
Make sure that the machine is equipped with a grounding system.
Use a dry cloth to clean the machine.
Before any operation is performed, disconnect the power cable from
the socket.
Use original spare parts only.
SPECIAL WARNINGS FLEXIBLE TUBE
Avoid contact with any kind of solid, liquid or gel lubricating substance
(oils, soaps, talcum powder, graphite etc.) since they could cause the
structural yielding of the product as well as the contact with water or
liquids would damage it causing oxidation etc.;
Clean the flexible tube only with a dry cloth;
Respecting the limits of the minimum radius of 70 mm and bending
away from the fasteners 30 mm terminals;
Respect the application limits at room temperature ranging between
+5° C and +40°C and relative humidity not higher than 60%;
Do not turn the hose, this may cause a reduction in the stiffness of the
tube.
Non‐compliance with the rules above relieves of all responsibility.
USEFUL CONTACTS AND ADDRESSES
For technical service please apply to the dealer that invoiced the device, or directly
to:
TECNO‐GAZ SpA
Str. Cavalli n°4 – Sala Baganza – Parma – ITALIA.
Tel. +39 521 8380 ‐ Fax +39 521 833391
e‐mail : info@tecnogaz.com http://www.tecnogaz.com
6