Manual Operation; Declaration Of Conformity - Erreka LINCE Manuel De L'installateur

6

MANUAL OPERATION

In the event of need, the gate may be operated manually:
Unlocking for manual operation
1 Turn the cover (1) 180º to reveal the cylinder.
2 Introduce the key (2) and turn 90º clockwise.

The cylinder will protrude a few millimetres.
3 Turn the key 90º anti-clockwise and remove.
4 Turn the handle (3) clockwise 270º until it
reaches the stopper.

The gate can now be operated manually.

The display will show STOP.
7

DECLARATION OF CONFORMITY

Erreka Automatismos declares that the LINCE actuator
has been designed for use in a machine or for assembly
along with other elements in order to form a machine
in line with Directive 89/392 EEC and successive
modifications.
The LINCE actuator allows us to carry out installations in
line with the standards EN 13241-1 and EN 12453.
Motorised operation locking
1 Turn the handle (3) anti-clockwise 270º until it
reaches the stopper.
2 Push the cylinder (4) inwards and turn the cover
(1) to cover it.
3 Move the gate manually until interlocked in the
actuator.
4 Activate an operation device: the gate will carry
3
out a reset (the display shows rS) and remains
ready for motorised operation.
The LINCE actuator complies with safety legislation in
line with the following directives and standards:
• 73/23 EEC and successive modification 93/68 EEC
• 89/366 EEC and successive modifications 92/31 EEC
and 93/68 EEC
• UNE-EN 60335-1
DESCRIPTION OF THE PRODUCT
LINCE actuator for sliding gates
3
47