Manual Operation; Declaration Of Conformity - Erreka DINGO Manuel De L'installateur

6

MANUAL OPERATION

The gate may be operated manually if needed:
Unlocking for manual operation
1 Insert the key (1) and turn clockwise 180º
without forcing it:

The rack drive pinion will come down from
its operating position, releasing the rack.
7

DECLARATION OF CONFORMITY

Erreka Automatismos declares that the DINGO operator
has been designed for use in a machine or for assembly
along with other elements in order to form a machine
in line with Directive 2006/42/EC.
The DINGO operator can be used to carry out
installations in line with standards EN 13241-1 and
EN 12453, provided it is correctly and suitably installed.
The installer shall be responsible for proper installation.
3
180º
D259A
DESCRIPTION OF THE PRODUCT
Motorised operation locking
1 Insert the key and turn it anti-clockwise 180º as
far as it will go.

The pinion will return to its work position, in
contact with the rack.
2 Activate a key device in order for the gate to
carry out a "reset".
The DINGO operator complies with safety legislation in
line with the following directives and standards:
• 2006/95/EC (low voltage materials)
• 2004/108/EC (electromagnetic compatibility)
• UNE-EN 60335-1
3
180º
D259B
DINGO operator for sliding gates
47