Manual Operation; Declaration Of Conformity - Erreka TORO Manuel De L'installateur

5

MANUAL OPERATION

In the event of need, the gate may be operated manually:
Unlocking for manual operation
1 Turn the cover (1).
2 Introduce the key (2) and turn clockwise
without forcing it.

The cylinder will protrude a few millimetres,
pushed by a spring.
3 Operate the handle (3) by turning it 180º to the
left.

The gate can now be operated manually.
4 In order to extract the key and leave the
operator unlocked, push inwards and turn anti-
clockwise.
6

DECLARATION OF CONFORMITY

Erreka Automatismos declares that the TORO operator
has been designed for use in a machine or for assembly
along with other elements in order to form a machine
in line with Directive 89/392 EEC and successive
modifications.
Motorised operation locking
1 Introduce the key (2) and turn clockwise
without forcing it, until the cylinder is pushed
out by the spring.
2 Operate the handle (3) by turning it 180º to the
right.
3 Push the key (2) inwards and turn anti-
clockwise.

Push the key inwards in order to turn.
3
4 Turn the key (2) and remove the cover (1) until
the cylinder is covered.
5 Move the gate manually until interlocked in the
motor.
The TORO operator complies with safety legislation in
line with the following directives and standards:
• 73/23 EEC and successive modification 93/68 EEC
• 89/366 EEC and successive modifications 92/31 EEC
and 93/68 EEC
• UNE-EN 60335-1
DESCRIPTION OF THE PRODUCT
TORO operator for sliding gates
3
59