Storage And Transportation; Maintenance And Environmental Protection; Service Instructions - Meister MSB750-1 Traduction Du Manuel D'utilisation Original

5452220-Schlagbohr_man 06.06.16 14:03 Seite 44
selection using the adjusting wheel on
the on/off switch.
Hammer drilling in concrete and
masonry
Set the hammer drill switch
to the "Hammer drilling" mode
Set the clockwise/anti-clockwise switch
to "clockwise" rotation. Screwing and
removing screws (Figure 21)
10 – Storage and
transportation
• Keep the power tool, operating
instructions and accessories together,
if possible, in the original packaging.
This ensures you have all information
and parts on hand at all times.
• Store the power tool in a dry and well
ventilated place out of reach by children.
• Always carry the power tool by the
handle surfaces.
• To prevent the power tool from being
damaged in transit, pack it well or use
the original packaging.
• Secure the power tool to prevent it
from slipping off or tipping over.
• Protect the power tool from vibrations
and shaking, in particular during
transport in vehicles.
11 – Maintenance and
environmental
protection
• Meister power tools are mostly
maintenance free. Use a damp cloth
to clean the housing.
44
• Only clean the housing with a damp
cloth – do not use solvents! Then dry
well. Never submerge the power tool
in water.
• Always ensure that the venting slots
in the power tool are kept clean.
.
CAUTION! Electrical and battery
operated units that no longer work
should not be disposed of in the
household waste! They are to be
collected separately, in accordance with
the 2012/19/EU directive for the disposal
of electrical and
electronic waste, and
sent for proper and
environ mentally-friendly
recycling.
Please discard power tools no longer
usable at a local collection point.
Collection and disposal of packaging
materials separately by types
complying with local rules and
regulations. For details, please
contact your municipal authority
concerned.
12 – Service instructions
• Meister devices are subject to
stringent quality control. If however
a functional fault shoult occur,
send the device to our servicing
address.
• The repairs will be carried out in a
short time.
• A brief description of the defect
speeds up the faulttracing and
repair time. If within the guarantee
period, please enclose the
guarantee document and the
proof of purchase.