Operation; Mode Of Operation; Storage And Transportation; Maintenance And Environmental Protection - Meister SB500M Traduction Du Manuel D'utilisation Original

5402020-Schlagbohr_man1 24.04.18 07:03 Seite 42
Use anti-clockwise rotation to release
jammed drills.
8 – Operation
Switching on/off
Insert the plug in a 230 V~ socket.
IMPORTANT! Always switch the
motor on before contacting the
material.
Switching on
Press the On-Off switch (4) carefully.
The machine starts. The number of revs
per minute varies according to the
pressure on the switch.
Switching off
Release the On-Off switch and wait until
the machine stops.
Switching on continuous mode
Press the On-Off switch and hold. Press
the locking button (2). Release the On-
Off switch. The machine runs at the
speed selected.
Switching off continuous mode
Press the On-Off switch. The locking
button unlocks. Release the On-Off
switch and wait until the machine stops.
9 – Mode of operation
Drilling in wood and metal
Never use the impact feature when
drilling in wood or metal. The impact
drilling switch must be positioned on
42
"Drilling". The reversing switch must be
set to "Forward". The speed is
controlled by pressing the trigger.
Preselection of speed (5).
Drilling in cement
Set the hammer switch to the "On"
setting, and the right/left directional
switch to "Right". Start with low
revolutions.
10 – Storage and
transportation
• Keep the power tool, operating
instructions and accessories together,
if possible, in the original packaging.
This ensures you have all information
and parts on hand at all times.
• Store the power tool in a dry and well
ventilated place out of reach by children.
• Always carry the power tool by the
handle surfaces.
• To prevent the power tool from being
damaged in transit, pack it well or use
the original packaging.
• Secure the power tool to prevent it
from slipping off or tipping over.
• Protect the power tool from vibrations
and shaking, in particular during
transport in vehicles.
11 – Maintenance and
environmental
protection
• Meister power tools are mostly
maintenance free. Use a damp cloth
to clean the housing.