Information Menu; Changing The Filling Levels To Intermediate; Changing Products - Melitta SystemService Bar Mode D'emploi

Manager
Info>>
Filling levels>>
Products>>
Operating parameters>>
Esc
Reset
Esc
GB
Manager
Info>>
Filling levels>>
Products>>
Operating parameters>>
Esc
Reset
Manager
Info>>
Filling levels>>
Products>>
Operating parameters>>
Esc
Reset
Manager
Info>>
General>>
Product meter
Filling levels>>
Products>>
Operating parameters>> Enter
General
Enter
Machine software
Date / Time
Cleaning times
Water filter
Esc
Reset
Manager
Info>>
Filling levels Beans 1
Enter
Beans 1
Beans 2
100%
Products>>
50%
Operating parameters
Esc
Reset
Enter
Manager
Info>>
Filling levels>>
Products>>
01: Coffee-crème (Cup)
02: Coffee-crème (Small jug)
03: Espresso
Coffee>>
Multiplier>>
04: 2 Espresso
Esc
Reset
9.c Information menu
With this function you can have different information
displayed:
First choose the function "Info".
If you then choose the menu item "General", the
following information is shown for additional
selection:
– "Machine software": The version of the
installed software is display here.
– "Date / Time": The set time is displayed here
together with the date under 9.h.
– "Cleaning times": The times set under 9.h
for the automatic cleaning prompt are
Enter
displayed here.
– "Water filter": The remaining capacity of the
water filter is shown here in litres, along with
the date for the filter change.
If you choose the menu item "Product meter",
you can read how often which product is
dispensed. A list of choices of all products
appears.
You can reset the displayed daily total for the
respective selected product by pressing the
lower key (Reset).
+
9.d Changing the filling levels to intermediate
–
values
Apart from the option described at 7.c where you
Enter
confirm the bean containers as full, you can set
intermediate values for the filling levels:
Select the function "Fill level" and then the
container "Beans 1" or "Beans 2".
You can now change the filling level using the
"+" and "-" buttons.
Save your changes with the "Enter" button,
reject them with the "Esc" button and return to
the previous menu level.
9.e Changing products
You can change the values for the product
components with this function.
Select the function "Products" in order to display
+
a list of all products.
With the
–
the product to be changed ...
Enter
and push the "Enter" button. The product has
now been selected for editing.
16
and buttons move the highlight to