Weekly Cleaning - Melitta SystemService Bar Mode D'emploi

Cleaning the brewing system:
As soon as the prompt "Drop in cleaning agent"
appears in the display ...
open the flap of the drop-in slot and drop a
cleaning tablet into it.
Close the flap and confirm with "OK".
The brewing system is now cleaned.
After completing the cleaning program ...
remove the splash guard again,
close the grounds drawer and
fold down the cup tray.
Remove and empty the container with the
remaining cleaning solution.
As soon as product dispensing is shown again in the
display ...
– Insert the suction hose again into the container
with fresh milk.
10.e Weekly cleaning
Clean the mixing and spout area at least 1 x per
week or also in between in case of high output or
visible soiling.
Switch the machine off as described under 7.b
and allow it to cool.
Dismantling parts:
Pull off the cover from the beverage spout
toward the top and ...
remove the beverage spout toward the front.
Pull out the funnel unit, remove its lid and then
pull ...
the two stream controls toward the top.
Clean the parts and reinstall them:
Place the parts for 15-30 min. in 500 ml warm
water with 25 ml "SWIRL RFM Cleaner" and ...
then rinse them off with clear water.
Cleaning Milk System
Cleaning agent
prepared?
23
OK
GB