Options; Call / Exit The Options Menu; Submenus / Select Functions - Melitta SystemService Bar Mode D'emploi

9. Options

The machine has been preset to make it immediately
operational for normal service operation. You
therefore only require the options described here if
you want to change these predefined settings.
9.a Call / Exit the options menu
Briefly hold the yellow chip-key before the
contact surface on the front of the machine so
that the contacts are struck properly. The base
menu appears on the display.
Push the "Options" button. The Options menu
now appears on the display.
Exit the options menu by pushing the button
below.
9.b Submenus / Select functions
If you have called up the options menu as described
under 9.a ...
move the marker with the buttons
the desired selection and press the button and
press the "Enter" button in order to call up the
marked submenu or the function ...
or the "Esc" button in order to cancel and return
to the last selection in each case.
With the buttons "+" and "-" you can change
the values if applicable, whenever offered
With the buttons  and
the places if applicable, whenever offered.
and to
you can proceed to
15

+
–
Esc Enter
Reset
GB